Soma Networks SOMAport 400, Руководство пользователя

Страница: 64 / 82

T
ROUBLESHOOTING
62
E
THERNET
N
ETWORK
S
ETTINGS ARE
I
NCORRECT
If you could not establish an Internet connection after connecting your
computer to the SOMAport via Ethernet, but your physical connection
seems to be intact, your computer’s Ethernet network settings may
need to be changed.
Use the procedure in this section appropriate to your operating system
to reconfigure Ethernet network settings. You may be prompted to
insert the installation CD for your operating system, and you may need
to reboot your computer after changing the settings before you can
successfully connect to the Internet.
To change network settings in Windows 95
1 Choose Start
→
Settings
→
Control Panel .
2 Double-click the Network icon.
The Network window opens to the Configuration tab.
3 Select TCP/IP .
„
If multiple TCP/IP connections are listed, select the one that contains
"Ethernet", "NIC", or "10/100 MB" in its name, go to step 5.
„
If TCP/IP is not listed, go to step 4.
4 Install TCP/IP:
i Click Add .
The Select Network Component Type window opens.
ii Select Protocol from the list.
iii Click Add .
The Select Network Protocol window opens.
iv Select Microsoft from the Manufactures list.
v Select TCP/IP from the Network Protocols list.
vi Click OK .
vii Insert the Windows 95 CD or reboot the computer if prompted to do so.
viii If the PC reboots, repeat steps 1 to 3, then go to step 5.