SAR-600EH
Easy
Start
Remote Password
7.2
7.3
This is used to setup the
Network Password
of
Remote HomePlug
. See
Fig 1-27
.
The other devices on the network with HomePlug capabilities will have a
Security ID/Device
Password
printed on the device itself. Find the passwords for the device you want to manage
and type it into the
Remote Device ID
text box. Next, type your private
Network Password
into
the
Network Password
text box. Click on the
Apply
button. This will set the Network Password
of the Remote HomePlug to the currently defined Network Password.
Figure 1-27: Remote HomePlug
Scan Network
The
Scan Network
function displays the MAC Addresses of all connected HomePlugs. See
Fig
1-28
. This page shows all HomePlug devices found on your powerline network identified by
their MAC addresses. Click on the
Refresh
button to refresh the listed information.
Important Note:
In case a HomePlug device in your home is not listed in the screen above, make sure that its
Network Password is not with a different password than your current private Network Password.
Figure 1-28 : Scan Network
Easy Start
Page 25 of 25