Solwise NET-PL-200AV11NRT Скачать руководство пользователя страница 64

Страница: 64 / 66

User Manual

Page 64 of 66

Enable Remote Management

Enabling Remote Management allows you to manage the router from anywhere on the Internet. Disabling Remote

Management allows you to manage the router only from computers on your LAN.

Remote Admin Port

The port that you will use to address the management interface from the Internet. For example, if you specify port 1080 here, then,

to access the router from the Internet, you would use a URL of the form: http://my.domain.com:1080/.

Use HTTPS

Setting this option requires all remote administration to use the Secure HTTP (HTTPS) protocol. For example, if you specify port 1080 above,

then, to access the router from the Internet, you would use a URL of the form: https://my.domain.com:1080/.

Remote Admin Inbound Filter

Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list of filters,

go to the Inbound Filter Section screen and create a new filter.

System Settings

Restore to Factory Default

Allows you to reset the device to its factory settings.

Restore Defaults

The Restore Defaults button will clear all user-entered modification and will reset the device settings back to its factory default values.

LAN IP address: 192.168.1.1

Username: admin Password: blank

Firmware Upgrade

The Upgrade Firmware page displays the Upgrade Firmware window so that you could update the latest firmware. Please make sure that you have

downloaded the latest and correct firmware from the product support website and store it in local drive.

Содержание NET-PL-200AV11NRT



































































Результаты поиска

Содержание NET-PL-200AV11NRT

Отзывы:

Solwise NET-PL-200AV11NRT, Руководство пользователя, Страница: 64 / 66

Результаты поиска

Содержание NET-PL-200AV11NRT

Отзывы: