Solwise Ltd,
www.solwise.co.uk
How to configure the M18P1 Router/AP as a simple Access Point
Assuming the unit is on factory default settings (power up and hold the reset button in
for at least 10 seconds if not sure), the default IP address for the unit is 192.168.1.1
and the username/password is admin. The following notes assume that your computer
network setup is the Windows norm with DHCP enabled by default.
1.
Connect your PC (computer) to one of the orange LAN ports on the unit.
With the M18P1 powered up, now reboot /switch on your PC.
2.
When the PC is booted up start your browser (Explorer or Firefox or
whatever’s your poison)
3.
On the address line of the browser enter 192.168.1.1 and press <enter>: The
M18P1 login page should show
4.
Enter admin and admin and click on Ok
