USER’S MANUAL FOR AWOS2400050 High Power Integrated Outdoor CPE
Version: 2.2
Solwise Ltd,
www.solwise.co.uk
10 of 27
4.3.9
Block Relay
Prevents that two wireless clients can communicate to each other directly through the access
point.
4.3.10
Hide SSID
Prevents the SSID to be sent in the AP broadcast messages, so it cannot be found by AP
scanners.
4.3.11
IAPP
Enables the Inter Access Point Protocol
4.3.12
802.11g Protection
In a mixed 802.11b and 802.11g environment, prevents interference between both systems.
4.3.13
Power
Adjusts the transmission power of the device. Only use higher values if necessary for the
application, according to the distance.
4.4
Security
Authentication and security setup. Sets the encryption type, and the authentication options.
4.5
Access Control
Allows the set up a list of MAC addresses for access control. The Access Control Mode can be set
to:
Disabled:
No MAC address access control is enforced.
Deny Listed:
The devices with MAC addresses listed in the table are denied access to the
wireless network. All other devices are allowed.
Allow Listed:
The devices with MAC addresses listed in the table are allowed access to the
wireless network. All other devices are denied.
