User Manual
Page 16 of 129
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the router, the main computer, and your
other computer devices.
To setup the router:
1. Plug one end of the Ethernet cable to the router’s
ETHERNET
port and then plug the other end to the Ethernet port in
your computer.
2. If you have another device you need to connect through wire into the router, use another piece of Ethernet cable. Plug
one end of the Ethernet cable to an available Ethernet port in the router and then plug the other end to the Ethernet
port of the device.
3. Plug one end of the telephone cable to the POTS Splitter’s
ADSL
port and then plug the other end to the router’s
DSL
port.
POTS Splitter
Your phone line carries with it both phone calls and Internet signals. When you are using the Internet and performing a
voice call at the same time, the connection produces irritating high-pitched tones. Installing a Plain Old Telephone Service
(POTS) splitter separates the two signals and eliminates the noise.
To setup the telephone POTS Splitter:
a. Locate the phone jack in your house.
b. Insert the POTS Splitter into the phone jack.
c. Plug one end of the telephone cable to the POTS Splitter’s
TEL
port and then plug the other end to the telephone.
4. Connect the power adapter to the router’s
9V DC
port and then plug it to the electrical outlet.
5. Press ON.
