AX6W-15J19 User Manual
8
MSR Setup
AX6W-15J19 magnetic card reader supports USB communication. The setup
program is usually stored in the E:\Tools\ENG\MSR folder of the machine's
hard drive. Program icons are as follows:
1. Double-click the icon, open the program, the system will automatically scan
the card reader connected to the motherboard interface. The two interfaces of
AX6W-15J19 are connected with USB port by default when the machines are
produced. As shown in the figure: Green words represent connected, red
words represent not connected. Click "continue".
2. This interface is used to set the card reader. Select read card from point of
USB in “Port Setting”; select tracks to read magnetic card and whether to add
a enter after reading data in “Track”; “Save” is used to save the current
Settings
；
“Load” is used to save the current Settings "set Default" is used to
restore the factory default settings Click "test MSR.
3.The test interface is as follows.
Tagging: Android models without this setting.
