Fire Features
7
version: 2019.11.14
Attach the Plug to the Pump electrical
cord by removing the screws on the
bottom of the plug.
Fish cable through housing and attach
appropriate wires to terminals.
North America
Black is +
White is -
Green is ground/earth
UK/Europe
Brown is +
Blue is -
Green & Yellow is ground/earth
Make sure to tighten up screws on bot-
tom of plug after connection.
Plug in the Pump cord into the Remote
Transponder unit and then into a wall
outlet.
Check your Remote On/Off control and
remove the plastic tab that prevents the
battery from discharging while in the
factory. The pump is now operational
through the use of this Remote Switch.
Feed pump cord
through Plug Housing
and attach leads appro-
priately.
Make sure to secure
housing before plugging
in.
Plug in the Pump Cord to
the Remote Switch Box and
then plug in the Remote
Switch Box to your outdoor
wall plug.
Use the remote switch to
turn on/off the pump.
+
-
Remote Transponder Box
on/off
*Remove battery protector
