10K Pack HV Installation Manual
© 2021 Soluna Australia Pty Ltd
Page 23 of 25
Published date: March 2021
Operating instructions
Please refer to the following diagram for details.
1)
Connect the inverter and BS with communication cables.
2)
Connect the inverter and the DC port of the BS with cables.
3)
Turn on the circuit breaker (found on the right side of the BS).
4)
To shut the 'battery' down, switch the circuit breaker from the 'On' position to the circuit
breaker 'Off' position.
4.
Consumer 'Start up' and 'Shut down' procedure
1)
To turn the BS on, push the circuit breaker up (the circuit breaker is located on the right
side of the BS: see diagram above).
2)
To turn the BS off, push the circuit breaker down.
Note:
CAN 1 of the battery is connected to the inverter for communication.
