Solton ARTIST 2000, Руководство пользователя

Страница: 5 / 22

To insert the Automatic Section, proceed in the following
way :
1) Make sure that on the front panel of the ARTIST 2000
the following buttons are pressed : AUTO BASS, CHORD 1,
CHORD
2, CUSTOM ARRANGER, MEMORY.
2) Choose a rhythm between 1 and 32 (the preset rhythms
are listed on the right side of the Display). To select
the rhythm, always insert two numbers on the button
row, for ex. 1 and 4 to set Swing, which corresponds to
nr. '14.
3) Press Start, and the rhythm will start playing.
4) Then play a chord on the left hand to set the complete
automatic going.
5) Adequately balance the volume of the single sections.
6) Insert or disconnect Snare Off and Ride Off to see how
the rhythm is varied.
7) Intro / Fill In, The Intro covers one beat and works
on1y before the Rhythm starts.
The Fill In can be started also when the rhythm already
plays and will terminate at the end of the beat, except
for when the button is not released. In the latter case
its rhythmic structure will be continuously repeated.
8) Ending. This element is used to definitively terminate
a performance.
9} Touch Start. When Touch Start is inserted, the Rhythm
and the Accompaniment will start only after the keys of
the left hand have been pressed. The Touch Start does
not work if Memory is inserted, except for the initial
start.
HOW TO CHANGE THE PITCHES OF THE
AUTOMATIC SECTIOIS
When Custom Arranger is selected, the sounds of the
Automatic Section can be modified only if VOICE CHANGE is
pressed.
You can choose the different pitches by selecting the 4
banks and the different effect groups Bass, Chord 1 and
Chord 2. Remember that there are 32 different pitches
available for the Bass, 32 for Chord 1 and 32 for Chord 2.
Important: Only pitches of the same bank can be selected. In
other words, you cannot combine a pitch from bank A with a
pitch from bank B.