Solter aeroprocess 2000, Инструкция по эксплуатации

Страница: 26 / 52

TECHNICAL SPECIFICATIONS
The machine is designed to be used outdoors. However, it should be protected from rainfall while it’s in use.
PROTECTION
The machine features all necessary protective measures to ensure proper operation. Temperature sensors ensure
that the components are kept within the operating range.
Monitoring of the supply voltage ensures that the machine operates within expected ranges and, in case of excee-
ding them, is disconnected to prevent possible anomalies.
OPERATING CYCLE AND OVERHEATING
The operating cycle is the percentage of 10 minutes during which the unit can weld at the required power without
overheating. If machine becomes overheated, the welding power will stop. The screen will display an alarm showing
which internal module is the one that has been overheated. The fans turn until the internal temperature is below
40°C. The machine will automatically reset when it reaches a safe temperature again. However, it is recommended to
wait at least 5 minutes before starting to work normally again.
To avoid overheating, reduce the adjusted welding power or the length of the welds.
Aeroprocess 2000 Aeroprocess 3200 Aeroprocess 3220
Input voltage (U1) 230V +/- 15% 400V +/- 15% 400V +/- 15%
Maximum input current (I1 máx) 37A 22,2A 22,2A
No-load voltage (U0) 68V 64V 64V
Max. absobed power 9KVA 9KVA 9KVA
Fuse 25A 20A 20A
Mig-Mag regulation range 30-200A 30-320A 30-320A
MMA regulation range 10-200A 10-250A 10-250A
TIG regulation range 10-220A 10-250A 10-250A
Mig-Mag duty cycle
200A 45% (40ºC)
200A 68% (20ºC) 320A 40% (40ºC)
320A 60% (20ºC) 320A 40% (40ºC)
320A 60% (20ºC)
MMA duty cycle
200A 45% (40ºC)
200A 68% (20ºC) 250A 60% (40ºC)
250A 100% (20ºC)
250A 60% (40ºC)
250A 100% (20ºC)
TIG duty cycle
220A 45% (40ºC)
220A 72% (20ºC) 250A 60% (40ºC)
250A 100% (20ºC)
250A 60% (40ºC)
250A 100% (20ºC)
Usable wires of Fe 0,6 - 0,8 - 1,0 - 1,2 0,6 - 0,8 - 1,0 - 1,2 0,6 - 0,8 - 1,0 - 1,2
Usable wires of Ss 0,8 - 1,0 - 1,2 0,8 - 1,0 - 1,2 0,8 - 1,0 - 1,2
Usable wires of Al 1,0 - 1,2 1,0 - 1,2 1,0 - 1,2
Maximum feeding speed 11m/min 18m/min 18m/min
Rollers 2R 4R 4R
Power of the motor 30W 65W 65W
Maximum spot time 10s 10s 10s
Temperature protection class H (180ºC) H (180ºC) H (180ºC)
IP protection class IP23S IP23S IP23S
Ventilation FORCED FORCED
FORCED
Weight 19 Kg 58 Kg 56 Kg
Aeroprocess 2000 Aeroprocess 3200 Aeroprocess 3220
Dimensions 407x602x285mm 808x935x308 808x935x308
Standards IEC 60974-1 / EC 60974-10
ATTENTION
If the nominal operating cycle of the machine is exceeded and the equipment is forced to work for too
long (without being allowed to cool properly), this could cause significant damage not covered by the
guarantee.
SOLTER
SOLDADURA S.L. AEROPROCESS 4