2. Recessed installation
1. Open a 21”-21.25” squre hole on the roof. See fig. 5.
2. Secure the frame by L shape brackets and screws. See fig. 6.
3. Hang the fixture on the frame by security rope. See fig. 7.
4.
Connect the wiring to line wires, black-black, white-white and green-green.
5. Secure the fixture to the frame by 4 screws.
3. Replacement for existing housing
1. Remove all of the electrical components from the fixture housing. See fig. 8.
2. Hang the fixture on a firm part of the housing.
Connect the wiring to line wires, black-black, white-white
and green-green.
3. Secure the fixture to the housing by screws.
* Use the other holes on the back of the fixture to replace for different traditional fixtures. See fig.9.
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
After installation, please
¾
check whether the lighting fixture is firmly fixed.
¾
check whether wires are connected correctly.
At last, turn on the power, and check if the lighting fixture works well. If not, please turn off the power and contact with
local dealer.
Warning: the luminaire shall be installed by qualified electrician.
FOR MORE LIGHTING INFO CALL
1460 PARK AVENUE, EMERYVILLE, CA 94608
510.891.1056
SOLTECHLIGHTING.COM
