04
05
03
Installation
WALL MOUNT
Connect
1. Take out all of the parts
from the package. Confirm
the installation location and
wire length.
2. Use the card to mark hole
positions, then drill 4 holes
of 0.3 inch diameter and 2.4
inches depth.
3. Drive expansion screw into the
holes leaving enough room
to slide the brackets onto the
screws. Then secure the Panel
and Fixture.
4. Open the silicon cover at the
bottom of the light, connect
the cable from the solar panel
to the cable from the light and
screw together tightly.
5. Adjust the solar panel and
LED light to the right angles
according to the local latitude
and the desired direction for
the light.
9
.8
–16.
4 F
t
3.
2–
6.
6 F
t
TIP
In order to get the best lighting
results and extend the life
span, we suggest you follow
the installation guide provided,
when you install the light.
