Solt GGSUM52, Руководство пользователя, Страница: 5 / 11

8 9
Screw the stainless steel fame back into place using the 4 screws removed as show below
Reconnect the wires to the Commends and Light
Refit the grease filter back into place
Install the air outlet pipe (optional).
Press the lock catch of the grease filter, remove the filter.
Remove the stainless steel frame by unfastening the 4 screw (M4*10).
Unfasten the screws (ST4*10), remove the lid of the terminal box, disconnect the wires
to the Commands at the connectors.
Disconnect the wires to the Light at the connectors.
Fasten the Hood in the cabinet by using the 12 screws (ST4*18).
7


Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
7

 Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
7


Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
7


Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
7


Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
7

 Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
Installation Instructions (continued) Installation Instructions (continued)
8



Reconnect the wires to the
Commands and Light.
Replace the metal Filter.
Install the air outlet pipe(optional).

Screw the stainless steel
frame back into place using
the 4 screws removed as
described above.
Installation
8



Reconnect the wires to the
Commands and Light.
Replace the metal Filter.
Install the air outlet pipe(optional).

Screw the stainless steel
frame back into place using
the 4 screws removed as
described above.
Installation
8



Reconnect the wires to the
Commands and Light.
Replace the metal Filter.
Install the air outlet pipe(optional).

Screw the stainless steel
frame back into place using
the 4 screws removed as
described above.
Installation
8



Reconnect the wires to the
Commands and Light.
Replace the metal Filter.
Install the air outlet pipe(optional).

Screw the stainless steel
frame back into place using
the 4 screws removed as
described above.
Installation