User Manual UM0016_ASW 25K-40K-LT-G3_EN_V02_0622 7
2 Safety
2.1 Intended use
1. ASW LT-G3 series inverter converts the direct current from the
PV arrays into grid-compliant alternating current.
2. ASW LT-G3 series inverter is suitable for indoor and outdoor
use.
3. ASW LT-G3 series inverter must only be operated with PV
arrays (PV modules and cabling) of protection class II in
accordance with IEC 61730, application class A. Do not connect
any sources of energy other than PV modules to ASW LT-G3
series inverter.
4. PV modules with a high capacity to ground must only be used
if their coupling capacity does not exceed 5
.0μF.
5. When the PV modules are exposed to light, a DC voltage is
supplied to this inverter.
6. When designing the PV power plants, ensure that the values
comply with the permitted operating range of all components at
all time.
7. The product must only be used in countries for which it is
approved or released by AISWEI and the grid operator.
8. Use this product only in accordance with the information
provided in this documentation and with the locally applicable
standards and directives. Any other application may cause
personal injury or property damage.
9. The type label must remain permanently attached to the
product.
