Soloshot 3 Скачать руководство пользователя страница 14

Track Mode

Field of View

WATER

For performing activities on the water. 
Examples: surfing, kiteboarding and sailing. 

FIELD

For performing activities on a 

level

 playing field or 

gradual slopes. 
Examples: soccer, track & field and equestrian.

TERRAIN

For performing activities on 

uneven

 surfaces. 

Examples: skating, snowboarding and motocross.

FLIGHT

For performing aerial activities. 
Examples: RC planes, drones (UAVs) and paragliding.

The Field of View (FOV) determines how much of the 
shot is visible on Camera. The tighter the FOV, the 
camera will zoom in. The subject will appear larger in the 
frame relative to the visible background. The wider the 
FOV, the Camera will be zoomed out. The subject will 
appear smaller in the frame relative to the visible 
background. 

Field-of-View Parameters:
Tight 

10 meters

Medium 

20 meters

Wide 

40 meters

Extra Wide 

80 meters

Framing

Trajectory

Framing determines where the subject will appear 
within the shot. Choosing a framing setting is entirely 
based on personal preference.

Example 1:

 framing the subject at Bottom Center will 

focus the camera on subject and the background of 
the subject. There will be little foreground in front of 
the subject.

Example 2:

 Center framing will put an equal emphasis 

on foreground and background, while keeping the 
subject at the center of the action.

Framing Parameters:

Top Left 

Top Center 

Top Right

Middle Left 

Middle Center 

Middle Right

Bottom Left 

Bottom Center 

Bottom Right

Note: 

When the Field of View has been set to medium 

or tight, the only framing parameters available are 
Middle Center and Bottom Center.

If the Base temporarily loses the Tag’s signal, the 
trajectory will determine how long the Base will 
continue to move in the same direction and speed at 
the time the signal was lost.

The default is set to 3 seconds. 
Range is 1-10 seconds.
Example: 

Great for surfing when becoming complete-

ly covered up in a barrel. This mode keeps the 
Camera tracking on the last known trajectory to 
ensure that you’re still in frame when reemerging. 
The Camera will temporarily pause tracking if it's 
unable to reacquire the Tag’s signal within the 
specified trajectory time setting. In other words, if you 
plan on being inside a barrel for more than 3 seconds, 
then set trajectory to 4 seconds or more.
Once the Camera reacquires the Tag’s signal, it will 
automatically resume tracking. 

USER MANUAL 

14

 SOLOSHOT.COM

Содержание 3























Отзывы: