Solomend HD PVR 800, Руководство пользователя

Страница: 27 / 35

26
Auto means system won’t do any asp will
be good display on a 16:9 TV but will be too narrow on a 4:3 TV, and 4:3 picture
source will be too wide in a 16:9 TV but will be good display in a 4:3 TV.
3 RF system and RF channel are for user to set the TV RF modulator output
signal VHF/UHF channel and TV system mode. If your TV is too old to supports
CVBS/YPbPr/HDMI, you can use TV RF cable to connect STB’s TV RF output port
to TV Antenna input port.
4 HMDI Video Out is for setting the HDMI video output mode. It has option:
RGB-Normal,RGB-Expand, YCbCr4:4:4 and YCbYr4:2:2. You can press
[Left/Right] Key to select each mode circularly.
5 Digital Audio Out is for setting the both SPDIF and HDMI’s digital audio output
mode, it has options LPCM Out, BS Out and Auto, You can press [Left/Right] Key
to select each mode circularly. LPCM Out means system will decode no matter
AC3 or PCM audio track data to be LPCM, digital audio decode or HDMI TV will
get LPCM digital audio data. BS out means system won’t to AC3 decode just
output AC3 RAW data to SPDIF and HDMI. Auto means system will detect which
the connected HDMI TV can decode and then output that data. If HDMI TV can
decode AC3, system just output RAW data, if HDMI TV can decode LPCM only,
system will just decode AC3 or LPCM to be LPCM and then output.
6 Press [Exit] key to draw back from “TV system” menu.
5.3 Local Time Setting
1 GMT Usage: This item is use
for open the usage of GMT. You
can press [Volume Up / Volume
Down] keys to switch “On/Off”.
2 The “GMT Offset” item is valid
only when the setting of “GMT
Usage” is “On”. You can
press[Volume Up / Volume Down]
keys to switch “GMT Offset”
value, and the range is “-12:00 ~
+12:00”, increase each half hour
progressively.
3 Summer Time: This item only valid when the setting of “GMT Usage” is “On”.
When “Summer Time” is “On”, it will add one hour to the time.
4 “Date” and “Time” items are valid only when the setting of “GMT Usage” is “Off”.
You can press [Volume Up / Volume Down] keys to moving highlight and use
number keys to input directly.
i. If the current channel provides the correct time
information, you will see the current time while you enter “Time” menu. If the
channel doesn’t provide time information, you have to input the date and time
information manually.
5
Press [Exit] key to draw back from “Time” menu.
5.4 Timer Setting
Select “Timer Setting” item and press [OK] key to
enter “Timer list” menu.
1 Current time information will display on the first
column; if the current time is incorrect, please
ect ration translation, 16:9 picture source