SIG-5430 User Manual Ver. 1.1
- 13 -
connection is terminated. The unit is seconds and can be set between 0 and
3600. Default value is 0.
3.2.3
Modbus
⚫
Modbus Type
This item is to set the Modbus type. This product allows the Slave only.
3.2.4
Analog Input
⚫
Mode
This item selects the analog input type. The setting value can be selected
among [0 ~ 5V], [4 ~ 20mA] and [0 ~ 20mA]. The default value is [0 ~ 5V].
⚫
1-bit ADC
This function converts analog input value into 1-bit digital value. This
function is only used in Internet switch.
⚫
1-bit ADC: High Ref.
This is the reference value for judging HIGH in 1-bit ADC. Analog input value
greater than this value is judged as HIGH. The setting unit follows the
setting of Mode and allows setting up to 5 decimal places.
⚫
1-bit ADC: Low Ref.
This is the reference value for judging LOW in 1-bit ADC. Analog input value
smaller than this value is judged as LOW. The setting unit follows the setting
of Mode and allows setting up to 5 decimal places.
