- 36 -
E
echo
Enable/disable echo of AT command
(ATE1-enable, ATE0-diable)
H
off-hook
Terminating Connection
I
Inquery
Showing ezTCP‟s Information
O
Online
Toggle to on-line sate
V
response code
The type of response code
(numeric-V0, verbose-V1)
Z
reset
Initializing ezTCP
8.3.
Extended AT commands
Command
Function
Description
+PLIP
local IP address
+PSM
subnet mask
+PGIP
default router
+PLP
listening TCP port
+PTO
timeout
+PRIP
Remote machine IP address
+PRP
Remote machine TCP port
+PWP
Write configuration
Saving configuration values
to EEPROM
+PRC
Enable/disable ezConfig
ON: 1, OFF: 0
+PARP
Enable/disable ARP
ON: 1, OFF: 0
+PDC
DHCP
ON: 1, OFF: 0
8.4.
Online State and Online Command State
If connection has not been established in ATC mode, the system is in online command
mode and permits the use of AT commands.
Once connection has been established, the system is in online state and does not
permit the use of AT commands. In order to use AT commands while TCP connection is
established, it is necessary to switch to online command state and then use AT
commands.
