SOL8930 Automatic Coffee Machine
Instruction Manual
Page 9 of 20
Note
: There is a protective cover for the milk tube connector inlet, pull it out of the way when you
need to insert the milk tube connector.
Protective cover
1.
Fill the milk container with milk and close the lid. Switch on the appliance by pressing the power
on/off button and make sure the drip tray is under the coffee spout and the water tank has water
inside. The appliance will auto-rinse a small cup of water, you can stop it by pressing the Hot
Water Button.
2.
Place a cup under the spout.
3.
Press the Latte Macchiato button. This button will light up, indicating Latte preparation. The
indicator will stay on during the preparation process.
4.
The machine will dispense milk first and then coffee.
5.
The preparation will stop automatically. If you want to stop the process, press the button again
during the operation.
6.
Remove the milk container from the machine and put it in the fridge.
7.
After use, see chapter “Daily Cleaning of the appliance”, section ‘
Cleaning the automatic milk
froth system’
.
Note
:
•
You should clean the automatic milk froth system before first use.
•
You should use cold milk (at a temperature of approximately 5°C/41°F) with a protein
content of at least 3% to ensure an optimal frothing result.
Warning
:
•
Steam and hot milk may spray out of the spout when starting the brewing.
•
Place the connection milk tube around the milk container lid after use. Do not let it fall freely
to prevent milk from being sprayed out, caused by the pressure difference.
