Figure 1: Meter and CTs
Application Note
This document describes the application of the Solis Meter and CTs
devices used with the inverter’s integrated export power control function
for export power controlling. These two are a requirement for export
control.
1. Scope
2. General notes
Please read the instructions carefully before commencing with the
installation. If in doubt, contact SegenSolar support for assistance.
Please Note that for export power controlling the Meter and CTs will
be required in the installation.
Ensure that the correct Meter and CTs are used. If your inverter did not
come with a Meter and CTs please contact SegenSolar.
The load must be switched off before commencing with installation.
i.
ii.
iii.
iv.