GB
GB
67
66
s
ASSEMBLING THE JUICER
STEP 1:
●
Place the motor unit on a dry, stable, moisture resistant and level work surface
with a power socket nearby. The clasp should be placed on the side with the
spout recess.
STEP 2:
●
Place the juicer bowl on the motor unit. The spout of the juicer bowl has to be
placed in the corresponding recess in the motor unit.
STEP 3:
●
Place the sieve in the juicer bowl. Firmly press down on the edge of the sieve
to make it audibly lock into place in the juicer bowl.
Caution:
Never touch the
grinding blades in the sieve, only touch the sieve by the raised edge! The grind-
ing blades are sharp, risk of injury!
STEP 4:
●
Place the cover with the funnel on the juicer bowl. The cover for the pomace
container should be directed in the direction opposite from the spout. The cover
should completely glide into the juicer bowl, the pomace container cover is placed
exactly above the bulge of the bowl.
STEP 5:
●
Push the clasp up and over the cover so that it audibly locks into place.
STEP 6:
●
Place the pomace container under the designated cover, so that it touches the
motor unit and the pomace container is fully covered by the cover.
Tip:
To sim-
plify the cleaning of the pomace container, you can line it with a thin plastic bag.