3.2 Alarm clock setting
In standard mode, push AL button to select which alarm you wish to set (AL1, AL2). Then hold down the AL button for more than two seconds to enter the
selected alarm setting mode. The active segment will start to blink. Setting sequence: hours
→
minutes
→
leave setting mode. Press
UP
to move one step
forward; longer push will cause faster moving forward. Press
UP
to move one step backward; longer push will cause faster moving backward. Press
AL
to
confirm the setting. If you don
’
t press any button for thirty seconds, the values will be saved as you have set them.
3.3 Alarm function
In current time mode, press UP to turn alarms on and off. When the alarm sounds, the alarm clock symbol will appear on the display and flash. Use the SNOOZE
button to put off the alarm function. Pushing any other button will turn the alarm off. The alarm will automatically turn off after two minutes. When the alarm
sounds, no signal is received from the sensors. The alarm function proceeds as follows: a) 0-10 seconds: one beep per second; b) 10-20 seconds: two beeps per
second; c) 20-30 seconds: four beeps per second; d) after 30 seconds: multiple beeps.
3.4 Sensor switching function
In the current time display mode, use CH button to toggle between the channels (CH1, CH2, CH3).
3.5 Sensor pairing function
First of all, a different channel must be set on the various sensors (1, 2, 3). Open the battery cover on the sensor and set channel number 1, 2 or 3 using position
switch. Then insert batteries and close the cover. When switching the weather station on for the first time, the sensors will be paired automatically. If you want
to change the pairing, switch the channel using the CH button and then hold it for more than two seconds. The pairing will take approximately three minutes
while the antenna symbol blinks. If the pairing fails, the weather station is probably out of the signal range.
3.6 Weather forecast function
The weather station generates a weather forecast for the next 24 hours
–
clear sky, scattered clouds, overcast, cloudy. The forecast information is for reference
only. This weather station can not be compared with professional devices or satellite or computer technology. For objective forecast, refer to official sources.
Clear sky Scattered clouds Overcast sky Rain
Note: The weather forecast may be more accurate under natural ventilation conditions. Errors occur when the device is located in an air-conditioned
environment.
A CE Declaration of Conformity has been provided to the product in accordance with applicable regulations. Available upon request from the manufacturer:
, or available for download at shop.solight.cz.
Manufacturer: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic