If you want to end the setting early, touch the B1 touch button twice or wait 20 seconds without pressing a single
button.
If the weather station is in the same time zone as Germany, the time zone is set to 00. If the weather station is located
more than 1500 km away from the transmitting tower in Germany from which the time control signal is received, it is
recommended to switch off the RCC function.
Pressure calibration
The weather forecast is based on an analysis of changes in air pressure. By default, the device is set to measure
absolute pressure (ABS) but can be switched to display relative pressure (REL). Absolute pressure is the pressure that
realistically corresponds to the value of the pressure measured directly at the measurement location. If you want to
display relative pressure that is converted to sea level, do the following. Find out from weather stations in your area
what the current relative pressure value is and set this value on your weather station. From now on, the relative
pressure (REL) will be displayed on your weather station.
Note: The
abbreviations ABS and REL are only displayed when adjusting pressure.
Setting daily alarms
Press and hold the B3 button for more than 2 seconds to enter alarm setting mode. The setting sequence is as follows
(AL1 = Alarm 1 (B1); AL2 = Alarm 2 (B2)):
AL1 HOUR -> AL1 MINUTE -> AL1 REPEAT -> AL1 SNOOZE -> AL2 HOUR -> AL2 MINUTE -> AL2 REPEAT -> AL2 SNOOZE
-> EXIT
REPEAT: M-F => Monday to Friday; S-S => Saturday and Sunday; M-S => Monday to Sunday.
SUSPEND: When set to OFF, the snooze function is not available. The unit of setting is minutes.
Press the B3 button briefly to toggle the display between alarm 1 and alarm 2. When the alarms are displayed, you
can use the up arrow to turn on the alarm. It will start waking up at the set time. When the alarm is switched on, the
display shows the or
icons.
Press B1 to activate the delayed wake-up function for the time you have set in the settings. To turn the alarm off, press
any button or hold your finger on B1 for more than 2 seconds.
Note:
If you do not turn off the alarm within two minutes, it will automatically turn itself off and start ringing again
the next day at the set time. The alarm clock has 4 levels of rising volume.
Moon phase and tide indicator
The icons representing the phases of the moon are shown below. The strength of the tides is shown by the icons
"HIGH", "MEDIUM", "LOW".
City settings
Press the B8 button briefly to enter city selection mode. Use the arrow keys to select the city abbreviation according
to the table below.
Num
ber
Country
City
Code
Num
ber
Country
City
Code
44
Czech
Republic (CZ)
Brno
BRN
118
Slovakia (SK)
Bratislava
BRV
45
Prague
PRG
119
Košice
KOS
Note:
To select another of the preset cities, please contact our customer support.
