2
EN
INSERTION OF BATTERIES
Remove the battery compartment cover and insert four 1.5V AA batteries into
the battery compartment. When inserting, make sure to observe the correct
polarity, which is marked on the bottom of the battery compartment. Replace the
cover.
When replacing, first remove the dead batteries and then insert the new ones.
Note
Do not insert a dead battery and a new battery at the same time or
use different types of batteries at the same time. If you will not be
using the hunting camera for a long period of time, remove the
batteries to prevent damage in the event of an electrolyte leak.
Warning
Do not short-circuit or otherwise damage the battery. Never throw
the battery into a fire. Discharge the battery and dispose of it in an
environmentally friendly manner. Do not dispose of batteries in
mixed waste.
INSERTING AN SD CARD
Insert the SD card into the hunting camera before turning it on. Insert the SD
card into the slot. When inserting, make sure to insert the card correctly. The
illustration next to the slot shows how to insert the card correctly. If the SD
card is not inserted correctly, an "X" will appear in the upper corner of the
screen.
