Disassembly guide and optional’s
ENGLISH
4.
Remove the 4 screws indicated in figure 4 and remove the corresponding cover. The example
replaces fader number 8, located on the right side of the console. Note that when you flip the
unit over, faders 7 through 12 will be on the left.
5.
Unplug the polarized connector to remove the fader.
Figure 6: Desconectar el atenuador
6.
Mount an original spare part following the previous steps, in reverse order.
2. Swap 8 IN and Dante AES/67
In UX24 units the user can choose between two optional inputs module:
•
8-IN gives
8 balanced stereo inputs
(analog).
•
A-67 gives
AoIP DANTE support
for 16x16 channels.
To replace these module, proceed as follow:
1.
Remove the bottom base from the cabinet. To do this, support the console on its sides, with
the base upwards. Use supports under the sides, made of expanded polyurethane or similar
material and with a height of no less than 5 cm (see Figure 3 in
Fader’s replacement
).
2.
Quit the screws indicated in the figure. Remove the base.
10/15
Figure 4: Access to the faders
Figure 5: Faders 7 to 12 (right panel) in UX24
