RT-RoIP2-Zello User’s Guide
Copyright © 1999-2015, Innotek Company Limited. All Right Reserved.
6
System Setup
Connect the Radio Unit to an external antenna.
Connect the RT-RoIP2 to a Radio Unit by using the bundled connection cable.
Connect the RT-RoIP2 to an IP network by using the Ethernet cable.
Turn on the Radio Unit and adjust its volume to approximate 1/3 position of maximum level.
Adjust the radio frequency and CTCSS on both Radio Unit and all other handhelds/mobiles.
Connect the RT-RoIP2 to power outlet by using the AC adapter to turn on the RT-RoIP2.
Setup PTT Control Mode of RT-RoIP2
The RT-RoIP2 ships with PTT Control Mode 1 for supporting the connected radio with the PTT pin embedded with
MIC pin(Motorola). If the PTT and MIC are on separate pins(Kenwood), please set the DIP SW1 to ON position.
Setup Zello App
The Zello app was preset with below settings by default. You just need to add a Zello account to operate. If the
settings are changed, please setup again with reference to below steps.
Run the Zello app
Press the [MENU] button to pop-up the setup menu.
Press the [Options] item to open the Options setup menu.
Press the [Alerts] item.
Check the item of “Incoming message” only.
Press the [BACK] button to exit.
Press the [Interface] item.
Check below items only:
“Lock screen orientation”
“Auto-run on startup”
“Show on incoming message”
“Show audio level meter”
Press the [BACK] button to exit.
Press the [Restrictions] item.
Set “Show trending channels list” to OFF.
Press the [BACK] button to exit.
Press the [Under the hood] item.
Press the [Map] icon to map the PTT key.
Press the PTT button of a handheld radio to call to the Radio Unit connected to the RT-RoIP2, the PTT key
value of “Headset hook” should be mapped.
Change the [Hand Button Action] to “Hold to talk”
Un-check the item of “Turn on push notifications”.
Press the [BACK] button to exit.
