RT-RoIP2-Azetti User’s Guide
Copyright © 1999-2015, Innotek Company Limited. All Right Reserved.
6
System Setup
Connect the Radio Unit to an external antenna.
Connect the RT-RoIP2 to a Radio Unit by using the bundled connection cable.
Connect the RT-RoIP2 to an IP network by using the Ethernet cable.
Turn on the Radio Unit and adjust its volume to approximate 1/3 position of maximum level.
Adjust the radio frequency and CTCSS on both Radio Unit and all other handhelds/mobiles.
Connect the RT-RoIP2 to power outlet by using the AC adapter to turn on the RT-RoIP2.
Setup PTT Control Mode of RT-RoIP2
The RT-RoIP2 ships with PTT Control Mode 1 for supporting the connected radio with the PTT pin embedded with
MIC pin(Motorola). If the PTT and MIC are on separate pins(Kenwood), please set the DIP SW1 to ON position.
Setup Azetti PTT/PoC App
Please add an Azetti PTT/PoC account and setup the gateway with below settings.
Run the Azetti PTT/PoC app.
Enter Provider Code and then press OK button.
Press the [MENU] button to pop-up the menu.
Press the [Settings] item to open the setup menu.
Press the [PTT Settings] item and set below items to OFF.
[Voice Recording]
[PTT Button on screen]
Press the [BACK] button to exit.
Operation
When the system is installed, the Radio Unit and the apps are configured, the system is ready to
use now.
Azetti PTT/PoC Gateway and Link System
Run Azetti PTT/PoC app.
Press [Configure] button to add username and password.
Press the [Save] button to save user data.
Press the [Connect] button to connect to server.
Press [Contacts] or [Groups] to select an user or a group.
Now the RT-RoIP2 is standing by calls from other mobile phones, 2-way radios from remote RT-RoIP2 sites
and local 2-way radios.
