SolidRun ClearFog, Руководство пользователя

Страница: 18 / 22

U
SER
M
ANUAL
M
ARCH
2017
SolidRun Ltd www.solid-run.com Page 18 of 22
7 HaMada Street, Yokne’am Illit, Israel
CAUTION
Avoid overheating the product.
Operating the product in ambient temperature above its specifications may cause
overheating or explosion of the battery resulting fire, burns or other injuries.
DANGER
Stop using the product immediately if it emits smoke or a strange smell, or otherwise
behaves abnormally.
NOTICE
Following are the required operating position and conditions:
Do not place the product on unstable surfaces
Do not place the product on elevated surface and secure it from falling from high places on passerby
Do not place the product on heat-generating surface or near heat emitting devices or direct flame. Verify
that there is sufficient clearance between the product and any other device exhaust warm air
The product operating ambient range is temperature of 0-40 °C (32 to 104 °F) and Relative humidity of 10-
90%. SolidRun recommends that an ambient temperature of 20 to 25 °C (68 to 77 °F) and relative
humidity of 30-50% is maintained during normal operation as this will result in better performance and
longer life of the equipment. Temperature must not exceed the maximum temperature specified
above.
Do not expose the product to moisture or dust.
The product is not liquid-proof; therefore, the equipment must be protected against penetration by
liquids. If the necessary precautions are not taken, the user may suffer electric shock or the product
itself may be damaged, which can also lead to personal injury.
Never use the product under conditions in which condensation has formed or can form in or on the
product, e.g. if the product has been moved from a cold to a warm environment. Penetration by water
increases the risk of electric shock.
9.6 AC/DC
ADAPTER OR POWER SUPPLY
- E
LECTRICAL SAFETY
DANGER
The following information on electrical safety must be observed, failing to follow these
instruction may result in electric shock, fire and/or serious personal injury or death.
Use only the adapter or power supply supplied with the product or adapter or power supply with the
following specifications:
o
Output voltage of 12V and current of at least 2A and not more than 5A
Prior to powering the product and plugging the adapter or power supply to the mains supply, always
ensure that the nominal voltage setting on the adapter or power supply matches the nominal voltage
of the AC supply network.
If extension cords or connector strips are implemented, they must be checked on a regular basis to ensure
that they are safe to use.