SolidRun ClearFog PRO, Руководство пользователя

Страница: 8 / 22

U
SER
M
ANUAL
M
ARCH
2017
SolidRun Ltd www.solid-run.com Page 8 of 22
7 HaMada Street, Yokne’am Illit, Israel
4 C
ONNECTOR
L
AYOUT
SolidRun’s ClearFog PRO has standard interfaces. The non-standard interfaces are listed below:
1. mikroBUS Header
2. TDM Telephony Audio Header
3. Power over Ethernet (PoE Expansion Header - for optional module development)
o
Please refer to the previous chapter for specific locations on the board.
The schematics by components can be found SolidRun’s wiki pages, please look for the file under the
product documentation tab.
4.1 C
ERTIFIED
C
ABLES
The following is a list of industry-standard cables, sorted by type, with the necessary compliance
requirements that have been proven to work well with the Clearfog product family.
These examples are the cables which SolidRun uses for testing, and should provide enough information to
source products from your prefered cable vendor.

Ethernet cable: Monoprice 24AWG Cat6A 500MHz STP

USB Cable: SuperSpeed USB 3.0 Type A Male to Female Extension Cable in Black

SFP connector: GigaLite GE-GB-P1RT-E SFP module with Monoprice 24AWG Cat6A 500MHz STP
cable