4. Connect the 15' cable to “Antenna
Bracket” at the “INPUT” port.
8
5. There are 2 powerful magnets at the
bottom of the DC Power Feeder, which can
attract the device to the surface of ferrous
materials.
Note: Make sure that the indoor antenna is parallel to the
horizontal plane
7. There are air outlet clips in our
accessories, which can attract the
“Secondary Antenna” to the air outlet. Or
use the Iron Stiker sttract the feeder to car
center console or center armrest
somewhere, take care not to affect driving
operation.
6. Use the Iron Stiker sttract the “Main
Antenna” bracket to non-metallic furniture
surfaces in the RV, such as on the inside
door of a wardrobe, under a sofa, under a
table somewhere
8.
Connect Booster and Inside Antennas to “Power Feeder & Splitter”.
Connect the
cable from the booster to port “INPUT” and two cables from inside antennas to the
“Main””Secondary”, then plug it in to the nearest power outlet.
Power cord
Secondary Antenna
Outside antenna
Main Antenna
