WARNING:
•
Do NOT cover the booster body with
anything. This prevents if from cooling
down. If the product becomes overheated,
it will automatically shut off or cause
permanent damage.
•
Use only the power supply provided by
SolidRF. Any other non-approved products
by SolidRF of self-made power cables may
damage the booster.
•
Connecting the booster directly to the cell
phone with use of an adapter will damage
the cell phone.
•
The booster is designed for use in vehicle
ONLY.
•
Some of the 12V DC lighter power sources
will not shut down when the vehicle is
turned off. Please ensure to switch off the
adapter when you leave the vehicle to
prevent the vehicle battery from being
drained.
Installation - Step By Step
Step 3: Arrange the booster
a. Choose position
•
Under the passenger’s seat, or in the trunk of
the vehicle.
•
Free from excessive heat, direct sunlight and
moisture.
b. Connect the outside antenna’s connector to
the port labeled “
OUTSIDE
” of the booster.
c. Connect the inside antenna’s connector to
the port labeled “
INSIDE
” of the booster.
Step 4: Power on the booster
•
Plug the power adapter into the power port
on the booster.
•
Then plug into the car 12V DC lighter.
•
Switch on the adapter by pressing the button
on the power adapter. A blue light will be
seen when it is working.
Inside antenna
Outside antenna
Adapter cord
