SOLIDpower BlueGEN BG-15 Generic, Руководство по обслуживанию

Страница: 6 / 36

Manual - BlueGEN BG-15 Generic Installation Manual - Europe
© SOLIDpower GmbH 2019 3
1.
INT‘ODUCTION
1.1.
Pu pose
This manual explains how to install a BlueGEN appliance, the latest Solid Oxide Fuel Cell (SOFC) technology
manufactured by SOLIDpower Spa.
The BlueGEN appliance can be installed in two configurations:
1. Electrical generator system (with no heat recovery).
2. Co-Generation system (with heat recovery).
Depending on the installation configuration additional space may be required for hot water tanks or other
equipment.
If the installer has any concerns relating to the installation of the BlueGEN appliance, the installer should
contact SP for further advice. Contact details are shown in the Feedback section of this document.
NOTE: This installation manual does not include instructions for the installation of the fuel cell stack onto the
Fuel Cell Module. This activity is to be performed only by appropriately qualified service personnel.
1.2.
Lege d
The symbols used in this document are:
Symbol Description
Caution
Ignoring these warnings may result in damage to the BlueGEN appliance or cause
death or serious injury.
Fire danger
Indicates fire danger or safety precautions required in the event of a fire.
Hot surface
Warning that the surface may be hot.
Refer to additional information
Details any steps required before undertaking, or helpful information to assist with,
the installation or maintenance tasks described.
European Declaration of Conformity
Certifies that this product has met European Union consumer safety, health and
environmental requirements. The appliance has been designed and built so as to
operate safely and present no danger to persons, domestic animals or property
when normally use, as defined in Article 1 of the Gas Appliance Regulation (EU)
2016/426.