Solidator 2.0, Руководство пользователя

Страница: 8 / 20

8
Calibrate the Solidator
1. Remove the black acrylic sheet that is in the place the resin container will be mounted.
2.
Attach the printing platform to the Z-Axis using the knob-screws. Make sure the label is
pointing to the front.
3.
Position the resin container in the machine with the resin container label to the front. The
label indicates the correct direction of the resin container. The label must be in the front! This
is very important and must never be done wrong!
If there is no Label, you can still see the correct direction of the container. The min/max fill
lines have to be in the back, one air-entry hole on the left and two air-exit holes on the right,
that’s the correct direction.
4. Turn on the Solidator using the power switch.
5. Within 15 seconds, the Solidator logo should be displayed on the touch screen.
6. Following another 45 seconds, you should see the following screen: