Joining Cabinets
Cabinets should be joined be-
tween each set of hinge holes
on the inside edge of the side
panel as shown in the diagram.
Mark 25mm as a guide on a
3mm diameter drill bit using
masking tape. Drill between the
hinge holes into the cabinet
side panel (18mm) and 7mm
into the next until you reach
the marker. Join the two
cabinets together using the
25mm screws provided
C
Fitting Shelves
IFU-326.1
Push the shelf supports
into the pre-drilled shelf
holes then sit the shelf
on top.
F
5