manualshive.com logo in svg

Solid State Logic Soundscape Mixer, Справочное руководство

Поделиться
Скачать
Solid State Logic Soundscape Mixer Скачать руководство пользователя страница 79

Soundscape Mixpander 

 
 
 
 

Page 79 of 109 

 

 

If the Mixer you are opening has one or more columns which refer to units that are not available 
(e.g., cards that you have removed from the computer), the following dialog box will be displayed: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Select “Skip this column” if you want to load the Mixer without these columns. Upon clicking 
“OK” the Mixer will be loaded and a confirmation message will be displayed: 
 
 
 
 
 
 
 
 
 
Alternatively you can select “Mute the entire column and map it to following unit:” and choose 
another card using the drop-down list. Upon clicking “OK” the Mixer will be loaded and a 
confirmation message will be displayed: 
 
 
 
 
 

 
 
 

NOTE:

 

The

 

Mute

 

tool

 

can

 

be

 

used

 

to

 

unmute

 

the

 

muted

 

mixer

 

columns.

 

This

 

may

 

cause

 

mixer

 

elements

 

to

 

become

 

muted

 

in

 

other

 

mixer

 

columns.

 

 

Содержание Soundscape Mixer














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды