Solid State Logic Sigma Delta Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 72

Solid State Logic Sigma Delta Скачать руководство пользователя страница 39

Pro Tools + Sigma + Control S Tablet

This example will describe how to use a control surface & tablet with Sigma and Pro Tools. The control surface used in this
example is a Nucleus using MCU protocol over ipMIDI ports; however, this setup will work with any MCU enabled controller.

If your control surface is ip based like the Nucleus, you will need to use an Ethernet switch to connect both devices
to one Ethernet port on your computer – we advise not using 2 ports on your computer. Please note that the Sigma
and control surface will need to be in the same ip address range (for example, Sigma:192.168.1.201,
Nucleus:192.168.1.5). A DHCP switch will assign this automatically.

To connect a tablet running the Sigma Remote app to the setup, the switch will need the ability to provide a wireless
connection.

Boot Order

Please note:

First turn on your control surface, then your Sigma, and then open the Sigma Remote Control app on your

computer. Once all of these elements are talking, open the Sigma Control app on your tablet.

Control Surface Settings

If your control surface can use multiple protocols, please ensure that the console is set to MCU protocol for control of
Sigma. If using a multi-layer control surface (such as Nucleus), ensure that the layer for direct Sigma control is set to MCU;
in this example, layer 1.

Sigma remote Settings

1.

Open the Sigma Remote application and go to the ‘Settings’ page.

2. Set ‘Control Protocol’ to

Delta (MCU)

from the drop-down box (see image). This may prompt a reboot of your Sigma.

3. In this example we are assuming control of the Sigma on layer 1 of the Nucleus. Set the ‘Channels 1-8’ to

ipMIDI port

1

, and ‘Channels 9-16’ to

ipMIDI port 2

. If using a controller other than a Nucleus, set the appropriate MIDI ports to

the channels you wish to control.

Pro Tools Settings

The Pro Tools Settings are identical to that on page 37. If you have a multi-layer control surface like Nucleus, it is worth
considering setting up a second layer of the controller to directly control Pro Tools.

Page 39

«
...
37
38
39
40
41
...
»

Содержание Sigma Delta









































































Отзывы:

Нет отзывов