Soundscape Mixpander
Page 36 of 59
the SSL Soundscape Mixer’s track insert elements can then be disabled (as described in the “Track
inserts” section of the “Mixer” chapter in the Soundscape Mixer Reference Guide).
The “Release ASIO Driver in Background” box should be unchecked. If it is checked, the audio
output from Cubase SX or Nuendo will stop when the window is minimized.
Multiple SSL Soundscape hardware devices and Cubase
The ASIO-2 driver specification allows for only one audio card to be used at any single time.
However, the current implementation of the SSL Soundscape Device Driver allows multiple SSL
Soundscape audio cards to be used simultaneously under ASIO-2 by presenting them to the
application as a single device. In order to use multiple cards simultaneously, "All Devices" must be
selected in the SSL Soundscape ASIO Panel. To open the SSL Soundscape ASIO Panel in Cubase,
click Device Setup under the Devices menu, select “VST Multitrack” and click the “Control Panel”
button (example based on Cubase SX Version 2.2):
NOTE:
There
is
a
risk
that
Cubase
SX
will
“freeze”
on
startup
if
it
does
not
detect
the
hardware
it
was
using
the
last
time
it
was
stopped.
Therefore,
if
you
install
an
SSL
Soundscape
audio
card
to
replace
a
previous
soundcard,
do
not
remove
the
old
soundcard
until
you
have
installed
the
SSL
Soundscape
audio
card,
started
Cubase
and
set
it
to
use
the
SSL
Soundscape
audio
card.
For
the
same
reason,
make
sure
the
SSL
Soundscape
Mixer
is
running
before
launching
Cubase.