PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V
Toll Free. 866-592-3873
www.SolidApollo.com
page 5
Glass
Touch In-wall RGB
™
Installation: Putting your controller back together.
5.
Follow Diagram2 below to begin wiring your controller.
Your gang box should be secured in the wall at this time, with your controller backplate screwed
into, and your wiring connections secured within the gang box. You will now put back the white connection strip (with the blue side of the tape facing up) into the
faceplate slot, and the snap back on the faceplate to your backplate.
You can now put back on your controller’s faceplate, completing the installation.
Overlay the faceplate onto the
back plate (with the connection
strip secured) and snap your unit
together.
Your unit will look like this, when it
is securely inside the wall.
5.
A.
B.
D.
F.
G.
C.
E.
Push clip in
gently 1/16”
It should look
like this when
“unlocked”
Faceplate
