PRODUCT MANUAL
Glide Wireless LED Dimmer and Receiver
Toll Free. 866-592-3873
www.SolidApollo.com
page 2
Glide LED Dimmer and R
ec
eiv
er
™
Installation
Solid Apollo’s Glide Remote and Receiver are able to control 4 different single-color LED Lighting fixtures together, from 12-36V. Each output has a
max power output (Wattage) of 180 Watts. Each output will be dimmed and powered off together as a whole once the Glide Remote is synchronized
with the receiver. There is also an optional Push-Power button for a push-switch to control your lights manually. To setup your dimming system
1. Remove the White Plastic end caps of your receiver to expose the wiring slots.
2. On the left side (as shown in Figure one) you may connect 12-36 Volts of DC power depending on the LED lights you are using. Be sure to know
the power required by the number of single color LED fixtures you are powering (180W max per output) , and to have all power turned off and
unplugged. Connect your power supply wiring as shown below noting the positive and negative receptacles.
Figure 2. Wiring the “Mini-Dim” Glide
Receiver
3. To wire each single-color LED Fixture, first attach each positive and negative DC wire (as shown) and screw down securely on the right hand side
of your receiver.
4. Now attach your DC 2 Wire to your unpowered transformer/power supply, and then plug in your device. Your lights will turn on automatically, and
your receiver is now ready to synchronize and use. Your controller should look very similar to the below diagram when you are finished wiring.
Figure 1.
Positive (+)
Negative (-)
Power Source
(+)
(+)
(-)
(-)
(+)
(-)
(+)
(-)
Output 1
Output 2
Output 3
Output 4
