Solid Apollo 8-Zone RGB Remote Control Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 9

Solid Apollo 8-Zone RGB Remote Control Скачать руководство пользователя страница 9

PRODUCT MANUAL

8-Zone RGB Remote Control

8-Z
one R

GB R

emot

e C
on

tr

ol

™

Toll Free: 866.592.3873

Email: [email protected]

www.SolidApollo.com

Page 9

Controller

• Wireless 430Mhz Transmission Protocol

• 100 ft wireless range

• Auto OFF for battery longevity

• Requires 3 AAA Batteries (not included)

Technical Information

Receiver

• Voltage Input: 12V DC to 36V DC

• 5A per Channel (60-180W per channel)

• Memory function when power off

• Smart learning function for channel assignment

• Size: 7” x 1-6/8” x 1-6/8”

If you are having problems with the lights responding to the 8 Zone in either zone, first check that the remote control is
within range of the correct receiver (100 feet maximum).

Check that the lights in the zone are on, and the wiring to and from the receiver matches the diagram on page 4.

First check that the batteries are working on the remote, when the remote is turned on, a small red light will appear on
the remote on the top right corner. If the light does not come on, replace the batteries as shown on page 4.

If there is power going to the receiver and the lights do not shine when turned off and on, the 8 Zone could be dimming
the lights in that zone. Select the Zone on the remote, then press and hold the Increase Brightness Button then let go of
the button when the lights have reached the desired level of brightness.

If the lights are still not responding, you can re-pair the receiver to the remote control following the steps A through E
on page 5 titled “

HOW TO PAIR SEVERAL RECEIVERS TO THE REMOTE CONTROL”

1

2

4

3

5

This section will show you how to troubleshoot the 8 Zone Remote Control and Receiver.

Troubleshooting

«
...
7
8
9

Содержание 8-Zone RGB Remote Control










Отзывы:

Нет отзывов