Manuel HM acoustic housing
20
The two small spacers (No. 902) can then be
tilted in the base frame and attached to the
plate with three to four Velcro fasteners (No.
905).
Now coat the edges (see picture) with the self-
adhesive rubber-D-profile (NR.
913) . Before applying, make the steel plate dry
and free of grease so that the adhesion is good.
Mount the rubber-D-profile at the edge of the
plate (see insert). The rubber profile can be cut to
the right length with scissors.
Place the roof plate (No. 401) 1) on the inside
of the four cage nuts (No. 911). The cage nuts
must be clicked into the roof panel.
Содержание Sonasafe HM100NP
Страница 1: ...Installation Manual HM Acoustic Housing ...
Страница 24: ...Manuel HM acoustic housing 24 notes ...
