.
OPERATION INSTRUCTIONS
1. ON/OFF
-
Press the POWER button to turn the A/C on or off. When the unit is turned off, the Timer
function will be cancelled. The set temperature will be saved.
2. MODE SELECTION
-
Press the MODE button repeatedly to cycle between the different modes:
Cool, Dry (Dehumidifier) and Fan.
3. TEMPERATURE SETTING
-
Press the
▼
button to decrease the temperature when the unit is on. Stop
pressing the button when the desired temperature is displayed. Temperature range is 62⁰F
-
86⁰F. Press the
▲
button to increase the temperature when the unit is on. Stop pressing the button when the desired temperature
is displayed. Temperature range is 62⁰F
-
86⁰F. While the unit is on, press the
▲
and
▼
buttons simultane-
ously to switch between Celsius and Fahrenheit.
4. FAN
-
Press the MODE button to turn on the fan mode.
FAN HIGH –Press this button to set the fan speed to high. Can be used in COOL or FAN mode.
FAN LOW –Press this button to set the fan speed to medium. Can be used in COOL or FAN mode.
QUIET—Press this button to set the fan speed to quiet. Can be used in COOL or FAN mode.
5. SLEEP MODE
-
Press the SLEEP button on the remote control, When in SLEEP mode, the fan will run
on quiet to keep fan noise at a minimum. The temperature setting will gradually increase to 1°F above
the original set temperature for each of first 2 hours. The unit will keep operating the same temperature
until the sleep mode is turned off. Once the SLEEP mode is set, the display of the control panel will
automatically dim after 10 seconds.
6. ENERGY SAVER MODE
-
Press the ENERGY SAVER mode button to turn on ENERGY SAVER
mode. When the unit is in ENERGY SAVER mode, the ENERGY SAVER light will turn on. Set the
unit to the desired temperature for the room. Selecting ENERGY SAVER mode will cycle the fan off
and on with the compressor to limit energy consumption and maintain the desired temperature. Use
this feature when the room is unoccupied and a greater range of room temperature is acceptable.
*Energy Saver mode is the default startup mode
7. AUTO MODE
-
Press the AUTO button to activate auto mode. When the unit is in AUTO mode, the unit
will automatically choose the fan speed and cycle between COOL and FAN modes to maintain the room
temperature. Auto Mode will operate the unit in COOL mode when the temperature is above 72 degrees,
FAN mode when the temperature is below 72 degrees.
8. TIMER
-
Press the TIMER button when the unit is off to set up the Auto
-
on timer. The hour indicator
on the digital display will start flashing. Press the
▲
and
▼
button to set timer within 1
-
24 hours.
Press the TIMER button when the unit is on to set up the Auto
-
off timer. The hour indicator on the dig-
ital display will start flashing. Press the
▲
and
▼
button to set timer within 1
-
24 hours. To cancel the
timer, press the TIMER button again.
9. MY TEMP MODE
-
Press the MYTEMP MODE button to change the thermostat sensor from the air
conditioner to the remote location. When MYTEMP MODE is activated, double hyphen sign "
--
" will
flash 3 seconds on digital display. The air conditioner will cool the area depending on the location and
set temperature of the remote control. Take the remote control with you so the air conditioner cools
the room to your location.
10
.
CHILD LOCK
–
Press this button 3 seconds
to lock/unlock the remote control buttons.