18
-Fan Mode
: When the unit is in Fan Mode, the Fan Mode light will turn on. Fan Mode operates the
unit just like a fan and circulates air throughout the room without any additional cooling.
-Dry Mode
: When the unit is in Dry mode, the Dry mode light will turn on. Dry mode operates the
unit as an evaporative dehumidifier to remove excess moisture from the room. Use this feature when
there is excess humidity in the air.
7)
Auto-on Delay Timer
- To program the Auto-on timer, press the
DELAY TIMER
button when the
unit is powered off. Press the ▲ or ▼ buttons to set the desired time (1-24 hours) for the unit to
automatically turn on.
Auto-off Delay Timer
- To program the Auto-off Timer , press the
DELAY
TIMER
button when the unit is powered on. Press the ▲ or ▼ buttons to set the desired timer (1-24
hours) for the unit to automatically turn off.
8)
Check Filter
- After the unit is on for 250 hours, the
CHECK FILTER
light will turn on to remind you
to clean the filter. Press the
FILTER RESET
button once the filter has been cleaned to turn the light
off.
9)
Signal Receiver
- Point the remote control to the air conditioner when sending instruction to the unit.
10)
Exhaust Control
- The Exhaust control allows the air conditioner to re-circulate inside air when it is
set to CLOSED. When it is set to OPEN the air conditioner exhaust air outside and brings in fresh
air. Use the CLOSED position when maximum cooling is needed. OPEN removes stale inside air
and replaces it with fresh air.
OPERATING YOUR AIR CONDITIONER
