11
REMOTE CONTROL OPERATING INSTRUCTIONS
1)
Power On and Off
- If the unit is already on, press the
POWER (
I/O
)
button on the remote while
pointing the remote away from the unit. This will turn the remote on. If the unit is off, now press the
POWER (
I/O
)
button once to manually turn the unit on. Press the Power button once more to turn the
unit off. When you press the
POWER
button the upper right square on the remote control LCD Dis-
play will light up. When in Air Conditioner and Auto mode, the selected temperature will appear on the
remote control display. When the unit is in Fan mode and Dehumidifier mode you will see the “- -”
icon instead of the set temperature. This shows that temperature selection is not available when the unit
is in Fan or Dehumidifier mode. When the unit is in Fan mode you will see the “F*” icon instead of the
set temperature on the control panel of the unit.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Auto,
Air Conditioner, Dehumidifier, and Fan only mode. The upper left square on the Remote control dis-
play will light up showing which mode is selected. In Air Conditioner mode the display will show
“
COOL
”, in Dehumidifier mode the display will show “
DRY
”, in Fan mode the display will show
“
FAN
”, and in Auto mode the display will show “
AUTO
”.
3)
Fan Speed
- Press the
FAN
speed button to cycle through high, medium, and low fan speeds. The
display on the remote control will show HIGH, MED, LOW under the “SPEED” label on the remote
control LCD display. There is an additional
auto
speed setting that is enabled in only cooling mode.
This speed is next setting after low when pressing the
FAN
speed button on the remote control. The
speeds will cycle through in this order:
High, Medium, Low, Auto
. Each change in speed will be asso-
ciated with a “beep” sound from the unit. The remote control will not display “AUTO” under the speed
label. Once Auto fan speed is selected the unit will beep and there will not be a fan speed displayed on
the remote control.
4)
Temperature Setting
- When the unit is in Air Conditioner mode you can select your desired tem-
perature. Press the +or - to select your desired temperature setting. The temperature on the LCD display
on the remote control will increase or decrease accordingly. Pressing the - and + buttons simultane-
ously will change the temperature select between °F and °C.
5)
SLEEP MODE
- To set Sleep mode, make sure the unit is in Air Conditioner mode. Press the
SLEEP
Button on the remote control, The display on the remote control will show the “SLEEP” icon on the
remote control LCD display. When in
SLEEP
mode, the fan will run on low to keep fan noise at a
minimum. When in Air Conditioner mode, the temperature setting will gradually increase to 2°F above
the original set temperature for 6 hours. After 6 hours the temperature setting will return to the set tem-
perature. When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
6)
CLOCK
- To set the clock on the remote control, hold down either the
MIN
or
HOUR
button until the
displayed time flashes on the remote control display. Change the minutes by pressing the
MIN
button
and change the hours by pressing the
HOUR
button. Set the clock prior to programming the timer.
7)
TIMER
- To program the timer, first press the
T-ON
button. Once
T-ON
is pressed the auto-on timer
Fan Speed
High
Medium
Low
Auto
Remote control display
HIGH
MED
LOW
Unit control display
F3
F2
F1
FA
