background image

 

 

 

 

 
 

BUCKET FULL INDICATOR

 

When the Internal Water Tank is full, the Bucket Full light will illuminate and the unit will automatically 
shut down. The air conditioner will resume normal operation once Internal Water Tank is emptied.

 

 

INTERNAL WATER TANK

 

When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to 
evaporate some of the moisture fast enough. When this happens, the water will accumulate in an internal 
water tank inside the unit. The internal water tank holds approximately 1.5 liters of water. When this tanks 
becomes full, the unit will automatically shutdown and illuminate the Bucket Full indicator.

 

 

 
 

HOW TO INSTALL CONTINUOUS DRAIN OPTION: 

 

 

1.

 

Place the Portable AC on a level surface.

 

2.

 

Remove the cap on continuous drain port on the back of the unit to access the Continuous Drain Port.

 

3.

 

Thread a garden hose (not supplied) onto the accessible Continuous Drain Port.

 

4.

 

Lead Garden Hose to a floor drain and cut to length.

 

5.

 

Make sure that there are no kinks or knots in the garden hose (Fig 15.1).

 

6.

 

Turn on the unit and gravity draining will begin automatically.

 

 

 
 

Fig 15.1

 

MAINTENANCE

 

Содержание PSC-12HP-201





















Отзывы: