12
room.
NOTE:
It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.
Heat Mode
1)
Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the power cord into a grounded outlet.
3) Turn on the unit by pressing the On/Off button on the control panel.
4) Press the Mode button until “
” icon appears on the multi-color display.
5) Press the Ù or Ú button until the desired room temperature appears on the multi-color display. The tem-
perature ranges from 61
°
F - 88
°
F (16
°
C - 31
°
C).
6) Select the fan speed by pressing the Fan button. It is recommended to use the low fan speed.
NOTE
: When the unit is running on heating mode, the exhaust hoses are required and must be vented outside
using the supplied window kit.
Auto Mode
1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button on the control panel.
4) Press the
MODE
button until the “
” icon appears on the control panel display. Select the fan speed
by pressing the
FAN
button.
NOTE:
During AUTO mode, the unit operates in
Heating
mode when the room temperature is below 68
°
F,
Dehumidifier
mode when the room temperature is between 68
°
F to 80
°
F. And
Air Conditioner
mode when
the room temperature is above 80
°
F.
Sleep Mode
(This mode can only be selected when using the Remote control )
1) To set Sleep mode, make sure the unit is in Air Con-
ditioner mode.
2) Press the
SLEEP
Button on the remote control. The “
” icon appears on the control panel display.
3) When in
SLEEP
mode, the fan will run on low to keep fan noise at a minimum.
4) When in Air Conditioner mode, the temperature setting will gradually increase to 2
°
F above the original set
temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.
5) When in Heating mode, the temperature setting will gradually decrease to 2
°
F below the original set tem-
perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.
6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
