background image

MAINTENANCE

 

1.  Unplug the unit and let it cool completely. 

2.  To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild 

detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid 
enter the heater. 

3.  DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the 

heater. This may cause damage or deterioration to the surface of the heater.  

4.  DO NOT immerse the heater in water.  

5.  Wait until the unit is completely dry before use. 

 
 

STORAGE 

Store the heater in a cool, dry location when not in use. Preferably, to prevent dust and dirt build-up, use the 
old packaging to repack the unit.

 

 

 

TROUBLESHOOTING 

If the heater will not operate, please check the following before seeking repair of service: 

1.  Check if the power cord is plugged into an electrical outlet, if not, plug in. 

2.  Check if electricity to the main fuse is working. 

3.  Check if the Power Knob is turned to Low or High. If not, turn the Power Knob to one of these set-

tings. 

4.  Check if the heater is on a level surface. If the tip-over safety switch is not pushed in, the heater will 

not run. 

 

 

 

 

 

 

 

 6 

Meijer.com

Содержание HR3-08-21








Отзывы: