6
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only
operate heater in upright position with caster wheels attached.
1.
Turn the heater on by pressing the On/Off button on the control panel or the supplied
remote control.
2.
Select a heat setting.
Press the MODE button to toggle between the three heat settings; LOW (500W), HIGH
(1000W) and ECO mode. When using the remote control press either MODE button to
select the preferred power setting.
NOTE:
ECO mode is an Economic Energy Saving Function. When ECO mode is chosen the
heater will consume one-third less power once the room temperature reaches a certain point.
3.
Adjust the thermostat by pressing the arrows on the control panel or remote control. The
digital readout will display the selected temperature.
4.
Once you have chosen the desired temperature, the heater will remain on until the room
temperature increases to the temperature on the digital display. The heater will cycle on
and off to maintain the desired room temperature.
5.
This heater is equipped with a 12-hour automatic shut-off timer. To activate the timer,
press the TIMER button on the control panel or remote control. Each press of the timer
button will increase the heater operating time by one hour. The digital readout will
display the number of hours you have selected. To turn off the timer, simply press the
TIMER button until the digital readout displays your current selected temperature.
Receiver for Remote Control
Timer Button
Temperature Buttons
Mode Select Button
On/Off Button
Temperature Display
Indication Lights
