background image

Thank you for choosing a Soleus Air Utility Heater. This owner’s manual will provide you 
with valuable information necessary for the proper care and maintenance of your new product. 
Please take a few moments to thoroughly read the instructions and familiarize yourself with all 
the operational aspects of your new heater.  

 

For your own records, please attach a copy of your sales receipt to this manual.  Also, write the 
store name/location, date purchased, and serial number below: 

 

Store Name: ____________________________________________________ 

Location: ______________________________________________________ 

Date Purchased: _________________________________________________ 

Serial Number (located on back of unit): ______________________________

 

IMPORTANT INSTRUCTIONS 
 

When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, 
electric shock, and injury to persons, including the following: 

 

1.  Read ALL instructions before using this unit. 

2.  CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself. 

3.  This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If 

provided, use  handles when moving this heater. 

4.  Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at 

least 3 ft from the front of the heater and keep them away from the sides, top, and rear. DO NOT 
place towels or other objects on the heater. 

5.  Extreme caution is necessary when any heater is used by or near children or the disabled, or when 

the heater is left operating and unattended. 

6.  DO NOT operate any heater with a damaged cord or after the heater malfunctions, has been 

dropped or damaged in any manner. Return heater to authorized service facility for examination, 
electrical or mechanical adjustment, or     repair. 

7.  This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. 

NEVER locate heater where it may fall into a bathtub or other water container. To protect against 
electrical hazards, DO NOT immerse in water or other liquids. 

8.  DO NOT touch the control panel or plug with a wet hand. 

9.  DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar cov-

erings. Arrange cord away from traffic area and where it will not be tripped over. 

10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may 

cause an electric shock or fire, or damage the heater. 

11. To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO NOT use 

 2 

www.sylvane.com  1-800-934-9194

Содержание HI1-50-03













Отзывы: